Chrona, A Konfigure8 productDOCSWebsite
Account and billingGlossarySupport

Roles, skills and groups

Set roles for each shift, skills needed for those roles, and groups such as wards or buildings. Each shift needs one role; workers can hold several.

View as Markdown
Page tools
View as Markdown
On this pageSet them upOn the boardMoving a shift by handIn Auto SchedulePairingGroups

Set them up

  1. Open Schedulers, open the scheduler and select the gear on its board. In Roles and skills, select New role or New skill, type its name and select Save. Select a role’s or skill’s name to open its form, for example to set its Color.
  2. Under each role, in Required skills, pick the skills the role needs from the list. Each one shows as a tag; its x removes it. Select Save to keep the changes. The role’s form has the same list.
  3. Open Workers, then a worker. Under Roles and skills, pick their Roles and their Skills the same way.

Set each role’s required Standard hourly rate under its name in Roles and skills. The currency appears beside it:

Condition Rate behavior
Scheduler has a site Uses the site’s currency.
Scheduler has no site You choose; your organization’s base currency starts selected.
Change currency Save the rate as 0 first.
Shift at a site with another currency Rate is excluded from cost; the board names the worker.
Contract has no Hourly rate Shift cost uses the role’s rate.

These rates estimate Wages and Auto Schedule costs. Payroll uses its own rates.

Worker pickers offer roles and skills owned by or shared with their schedulers; a role’s form uses its own scheduler’s list. Add workers through Workers on the board. Share roles or skills in Roles and skills settings; sharing a role also shares its required skills. After removing a tag, Undo restores it briefly, including a skill’s dates.

A skill can count for set days only, such as a license that runs out. On the worker’s Roles and skills tab, select the skill’s tag, set Valid from and Valid until, and select Save. Leave either one empty for no limit. The end can’t be before the start. To renew a skill, change its dates.

A shift type lists the roles that may work it. Pick them in the Roles box of the shift type’s card, on the Shift types page of the scheduler’s settings. On a coverage row, pick one of those roles as its Role. When the shift type lists one role and the row names none, Generate uses that role. The shifts it makes take that role.

A shift type can also need skills of its own. In the card’s Skills box, type the first letters of a skill, then select Must or Should on its row. Auto Schedule gives the shift only to workers with every Must skill, and prefers workers with a Should skill. The tag shows the need, for example First aid – Must, in the skill’s color. To change a need, remove the tag and pick the skill again. The shifts Generate makes take the shift type’s skills.

On the board

  • A role holds on a shift only when the worker has every skill it needs, valid for the whole shift.
  • On the Roster grid layout, a note under a worker’s name names a missing skill, a skill that has run out or starts later, or a skill that runs out within 30 days. Point to it to read it all.
  • On the Timeline layout, each worker’s row shows their roles in each role’s color. A role with an outline has the same note.
  • To color shifts by role, set Color by to Role in Scheduler settings.
  • To change a shift’s role, open the shift and choose another Role.

Moving a shift by hand

The scheduler’s Skill rule sets what happens when you drop a shift on a worker who does not hold its role, or whose skills for that role are not valid on that shift:

Setting What happens
Don’t allow The board asks for a reason before it saves the move: see Assign anyway.
Warn The move stays, with a warning.
Off No check.

Set it in the scheduler’s settings, in Rules: open Schedulers, open the scheduler and select the gear on its board.

In Auto Schedule

Auto Schedule gives a shift only to a worker who holds its role, with the role’s skills valid for the whole shift. When no one fits, the shift stays open.

Pairing

A role can say who works with its workers. In the scheduler’s settings, under Roles and skills, open a role’s Advanced section. In Pairing, select Add role, then pick a role and its choice:

Choice What Auto Schedule does
Required Gives a worker in this role a shift only when a worker in the partner role works a shift that covers it in full. Otherwise the shift stays open.
Preferred Puts them with a worker in the partner role when it can.
Unpreferred Keeps them apart from workers in the partner role when it can.
Prohibited Does not put them on a shift that a worker in the partner role covers in full.

A role can pair with itself: Trainee + Prohibited Trainee keeps trainees apart; RN (registered nurse) + Required RN requires a second RN. A rule binds only its owning role. Each partner appears once; change its choice or remove it with x, then Save. If nobody else in the run holds the partner role, Auto Schedule omits that pairing and tells you.

On the board, Required and Prohibited follow the scheduler’s Deny rule. Checks cover assignments and drags that leave a worker without a full-shift Required partner or add a Prohibited partner. Moving a partner to another worker, time or the open row also checks workers left behind.

Messages name workers and roles; removing a partner also names the unpaired worker’s shift day. A move kept with Warn marks the shift with the missing or prohibited partner. In Auto Schedule’s report, Required pairings and Prohibited pairings are Must rules; Preferred pairings and Unpreferred pairings are Should rules.

In Chrona Workforce Mobile, a worker cannot take a shift that would put them with a worker in a Prohibited partner role who is already on: not as an open shift, a swap, cover, a shift from a template or a pick. The app says only that the shift is not theirs. A Required pairing does not stop a worker taking a shift: you or Auto Schedule add the partner.

Groups

Each scheduler has its own list of groups, and a group can have subgroups. For example, a store has the groups Front and Back, and Front has the subgroups Tills and Deli.

  1. Open Schedulers, open the scheduler and select the gear on its board. In Groups, select Groups. The scheduler’s groups open as a list, each with its subgroups and how many workers are in it.
  2. Select Add group, type its name and press Enter. To add a subgroup, open the group’s More actions (…) and select Add subgroup. Each name is used once among a scheduler’s groups, and once among a group’s subgroups.
  3. The board lists the groups, and each group’s subgroups, in the order of this list. Use Move up and Move down in More actions to change it. Rename changes a name everywhere it shows.
  4. Delete asks you to confirm, then removes a group that nothing uses. A group with subgroups stays, and the message says to delete its subgroups first. A group that workers, shifts, coverage rows, demand rows, staffing standards or demand driver values still use stays, and the message counts each use.
  5. Select a group to see its workers, each marked Home group or Other groups. A group also counts the workers in its subgroups. Select Add workers, tick workers of the scheduler and choose Add as Home group or Other groups. Adding someone as Home group moves their home group here. Remove takes a worker out of the group; removed from their home group, they have no home group on this scheduler. Each change saves at once.
  6. On the board, Workers sets the same thing per worker: their Home group (a group or one of its subgroups) and their Other groups from the scheduler’s list. A worker has one Home group on each scheduler they work for, and keeps their groups on other schedulers.
  7. On a coverage row or a demand row, pick the Group and Subgroup its shifts are for, or leave them empty for none.

On the Roster grid, workers appear by home group, then subgroup; shifts appear in their own group. Group bands show the name, worker count and open shifts needing cover; subgroup bands are lighter. Each group shows filled against needed shifts, including open work. Fold a band with its chevron to keep just the filled/needed row. The two buttons beside Resource expand or collapse all groups; the board remembers folds. Mobile shows a shift’s group and subgroup under its role.

Auto Schedule gives a worker only shifts of their home group, of their other groups, or with no group. A subgroup you add alone allows only that subgroup’s shifts. A worker with no group in the scheduler’s list can work any of its shifts. It prefers to give a shift to workers whose home group it is in. When you move a shift by hand to someone outside its group, the board warns you. You can keep the move: the shift then shows Outside ’s groups, and the Must rules list Outside their groups.

Search documentation

Browse documentation

Choose documentation

Connect your agent to Chrona

Connect Chrona MCP for documentation, setup guidance and configuration recipes.

Server address

https://mcp.chrona365.com/mcp

Streamable HTTP; authentication: None.

In Copilot Studio, after importing Chrona, add the Chrona Scheduler connector to your agent alongside Microsoft’s Dataverse tools.

Your agent needs separately authorized Dataverse tools to apply changes. Connecting Chrona MCP alone does not grant access to your environment.

Ask AI

How can we help?

Ask about Chrona’s setup, features or terminology. Answers link to the documentation they use.

Answers use public documentation. Check the linked sources.